Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Air Duct Cleaning in Los Angeles: What to Know First
Nikro air duct cleaning in Los Angeles means pulling years of Valley dust, pet dander, and construction debris out of ductwork using the same negative-pressure approach Nikro equipment was designed around. Our Nikro units run a true negative-air extraction, meaning we seal the system, put it under vacuum, and let the machine do the pulling while our rotary brushes knock debris loose at the duct wall. Most Nikro jobs in Los Angeles run between $450 and $900 for a full system, wrap in about four to six hours, and come with a written price before we touch a single vent.
This page is for homeowners and building managers who own Nikro equipment or whose contractor uses Nikro systems, and who want straight answers about how we clean with it, what it costs, and what actually happens when a Nikro unit fights a duct system that hasn’t been opened since the first Bush administration. Call (469) 972-3151 and you’ll get a live person, not a voicemail queue.
Key Takeaways
- We’re an independent Nikro service provider, not a Nikro dealer or authorized shop, and we service the equipment because it’s the right tool for the job, not because we’re tied to the brand.
- Full-system Nikro cleaning in Los Angeles typically runs $450 to $900, with the written price agreed before work starts.
- Nikro units pull air backward through the duct system, which is the correct way to clean without blowing debris into living spaces.
- We service ducts attached to all major HVAC brands, including Lennox, Trane, and Carrier systems, so the Nikro equipment works as one part of a bigger picture.
- Our 365-Day Done Right Promise is in writing on every job. If the clean falls short within a year, we come back and make it right at no charge.
How Nikro Products Fail - and How We Fix Them
Most Nikro units don’t fail in dramatic fashion. They lose suction slowly, or a filter loads up, or the operator skips a step and the job goes sideways. Here’s what we see in Los Angeles homes and commercial spaces, and what we do about it.
- Loss of negative pressure on portable units. Nikro portable vacuums, including older models still running in LA service fleets, rely on a sealed collection bag and clean secondary filter to hold vacuum. When that bag fills past about two-thirds, static pressure drops and the duct debris stops moving. We check the bag, swap or shake out the secondary filter, and confirm the vacuum gauge is reading where it should before we call a system clean.
- Brush agitation that skips the duct wall. Nikro’s rotary brush systems are only as good as the whip or brush head attached to them. On long supply runs in older Los Angeles homes, worn brush bristles leave a film of dust on the duct wall that looks clean from the register but hides a layer of fine particulate. We inspect the brush head before every job and replace worn heads before they under-clean a system.
- HEPA filter bypass on older units. Some older Nikro models allow a small amount of unfiltered air to escape around the filter gasket if the gasket has dried out. In a Los Angeles home with a resident who has allergies, that’s the difference between a clean job and a call-back. We check the gasket seal on every unit before we put it into service on a job.
- Debris settling in return ducts after the vacuum shuts down. Negative-air cleaning works because the system is under constant pull. If the operator shuts down the Nikro unit before the brush pass is complete, loosened debris settles back into low spots in return ducts. We keep the vacuum running through the full brush pass and a final flush, then do a video inspection to confirm nothing settled back.
- Clogged collection bags causing fine dust to blow through. Nikro bags do a strong job, but they load up fast in homes with renovation dust or pet hair. When a bag is overloaded, fine dust can pass through to the secondary filter and shorten its life. We replace bags at the right interval, not on a guess, and keep the secondary filter within its service life.
Our Nikro Air Duct Cleaning Process
Here’s what a Nikro air duct cleaning job looks like when Kestrel shows up at a Los Angeles home or business. No mystery, no upcharge at the door.
- 1
Walk-through and written quote. We inspect the duct system, check the Nikro unit we’re running, and put a flat price in your hands before any work starts. That price is what you pay.
- 2
System seal and vacuum setup. We seal supply and return registers, connect the Nikro vacuum to the duct system, and create negative pressure so debris only moves one direction: out of your ductwork and into the collection bag.
- 3
Brush agitation pass. Using the Nikro rotary brush system, we work each duct run from the register opening, knocking debris loose from the duct walls while the vacuum holds the system under pull.
- 4
Component cleaning. We pull and clean registers, grilles, and accessible duct work. Return ducts get extra attention because that’s where dust piles up first in Los Angeles homes with central returns.
- 5
Video inspection and system check. After the clean, we run a camera through representative duct runs to show you what the walls look like now. We check airflow and confirm the vacuum bag captured what it should have.
- 6
Final walk-through and guarantee. We leave the area cleaner than we found it, hand you the written 365-Day Done Right Promise, and answer any questions before we leave.
What Nikro Air Duct Cleaning Costs in Los Angeles
Most Nikro air duct cleaning jobs in Los Angeles run between $450 and $900 for a full system clean. Here’s what moves the number.
| Job Type | Typical Range | What Affects Price |
|---|---|---|
| Single-family home, full system | $450 - $700 | Number of vents, duct runs, accessibility |
| Two-story or larger home | $650 - $900 | Longer duct runs, additional returns |
| Commercial or multi-unit | $800 - $1,500+ | Square footage, rooftop units, scheduling windows |
| Supply-only or return-only clean | $250 - $450 | Scope of duct work |
The biggest variable is how long the system has been neglected and how many duct runs are involved. A 1,400-square-foot Reseda ranch with eight vents is a different job than a 2,800-square-foot Encino two-story with twenty. Either way, the price is in writing before work starts, and it doesn’t change at the door. Call (469) 972-3151 for a free estimate on your Nikro system.
Why Los Angeles Homeowners Call Kestrel Air Duct Cleaning for Nikro Work
Dale Whitmore grew up in the San Fernando Valley and spent his early twenties doing general HVAC maintenance before he figured out that the duct side of the system is where the neglect hides. He picked up formal training at Los Angeles Trade-Technical College, and he’s been cleaning ducts across Los Angeles for well over a decade. That’s why we run Nikro equipment correctly, not just adequately.
Every job operates under the Kingswell Guarantee: a written price before work begins, a defined arrival window, a clean job site, and a written guarantee on the work with a free return visit if the clean falls short within the guarantee period. Our technicians are background-checked and uniformed, and they use Rotobrush, Nikro, and Abatement Technologies equipment, not box-store shop vacs. And because we service ducts on Lennox, Trane, and Carrier systems every week, we know how Nikro cleaning integrates with whatever’s pushing air through your home.
Clean ducts, straight answers, price upfront - that’s the whole deal.
FAQs
No. We’re an independent Nikro service provider, which means we use Nikro negative-pressure equipment because it’s the right tool for thorough air duct cleaning, but we’re not tied to the manufacturer. That lets us give you honest advice about your duct system without worrying about a dealer agreement.
No. Nikro cleaning uses negative pressure and brush agitation inside the ductwork, not chemicals or abrasive processes that could damage duct lining or HVAC components. We clean within manufacturer-safe practices for whatever brand of HVAC system you have, including Lennox, Trane, and Carrier.
Most full-system cleans wrap up in four to six hours on a single-family home. Commercial jobs take longer depending on square footage and scheduling. We schedule based on our arrival window, not on a promise we can’t keep, and we answer the phone with a live person when you call to book.
If the duct cleaning falls short within one year, in writing, we return and re-clean the affected duct runs at no charge. To invoke it, you call us, describe what you’re seeing, and we schedule the return visit. That’s the guarantee, in plain terms, on paper before we start.
Because they’re quoting a partial job. Some companies price per vent or quote a teaser rate that covers only supply ducts, then stack on charges once the technician arrives. We give one flat price per system, in writing, before any work starts. Call (469) 972-3151 and we’ll tell you what your Nikro clean actually costs.
Get a Straight Answer on Your Nikro Air Duct Cleaning
If your ducts haven’t been cleaned in years, or you suspect the last company didn’t actually pull anything out, call Kestrel Air Duct Cleaning at (469) 972-3151. We’ll give you a written price for your Nikro-equipped system, a defined arrival window, and a real guarantee in writing. No price changes at the door, no disappearing after the invoice.
Written by Dale Whitmore, Owner, Kestrel Air Duct Cleaning at Kestrel Air Duct Cleaning, serving Los Angeles and nearby areas.