Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Longwood
Dryer vent cleaning in Longwood typically runs $120-$195 for a standard single-family home, and most jobs are completed in under 90 minutes with the written price agreed before any work begins. If your clothes are taking two cycles to dry or your laundry room feels unusually humid, the vent run is likely clogged with lint that’s backing moisture into your home.
We’re familiar with Longwood’s neighborhoods from Sweetwater Oaks to Sabal Point to Longwood Hills, and we know the housing stock here - the 1,400-2,200 square foot slab-on-grade homes built between 1978 and 1992 with dryer vent runs routed through attics that hit 140°F+ in July. Our Dryer Vent Cleaning team dispatches from our Miami office, and crews serve Longwood locally with arrival windows we actually keep. Call (469) 972-3151 for a free estimate.
Why Kestrel Air Duct Cleaning Is Longwood’s Preferred Dryer Vent Cleaning Company
We’ve built our reputation in Longwood by showing up when we said we would and putting the price in writing before touching a single vent. The Kingswell Guarantee, which governs every job we do, requires four things: a written price before work begins, a defined arrival window, a clean job site, and a written guarantee with a free return visit if the work fails. We’ve operated under that standard since 2004.
Our technicians are background-checked and uniformed, and they carry professional-grade Rotobrush rotary brush systems, Nikro negative-pressure units, and Abatement Technologies HEPA filtration - not box-store shop vacs. When a Sweetwater Oaks homeowner calls at 9 PM because they smelled something hot from the laundry room, a live person answers. No voicemail queue. No automated system. A real conversation, any time of day.
Local knowledge matters here. We know that homes off Wekiva Springs Road often have original 4-inch vinyl flex from 1985 that’s sagging at a 90-degree bend in the attic. We know contractors before us have blown air through those runs without camera inspection, leaving damp lint mats that re-clog faster in Longwood’s 80-90% summer humidity. We do it differently.
Dryer Vent Installation in Longwood
Dryer Vent Installation in Longwood often means replacing original flex runs that have exceeded their 15-20 year design life in 140°F+ attic conditions. A proper installation here typically costs $280-$450 for a standard reroute in rigid aluminum, with complex jobs involving soffit relocation or extended runs running $475-$650. We always inspect with a camera first, so you know whether cleaning will suffice or replacement is the honest recommendation.
When Installation Beats Cleaning
Original vinyl or foil flex from the 1978-1992 build era doesn’t just clog - it collapses. In Sabal Point homes where the dryer backs to an exterior wall, we’ve found runs that have sagged into a U-shape, creating a permanent lint trap no brush can fully clear. Rigid aluminum with proper slope and support straps solves this permanently.
Rigid Aluminum and Proper Termination
We terminate in a 4-inch metal hood with a backdraft damper, never the plastic hoods crushed against soffits that we see throughout Longwood Hills. The difference is airflow. A proper hood opens fully under dryer pressure and seals when off. Crushed plastic gaps let humid attic air in and lint-laden exhaust out - onto your siding, into your soffit, sometimes into your wall cavity.
Dryer Vent Repair in Longwood
Dryer Vent Repair in Longwood addresses the specific failure modes of this housing stock: separated joints in attic flex runs, corroded termination hoods, and bird guards that have become lint screens. Most repairs run $150-$275, with bird guard installation or cap replacement at the lower end and joint repair or partial rerouting toward the higher end. We photograph before and after, and the written price is in your hands before we start.
Attic Joint Separation and Heat Damage
Flex duct tape fails after decades in 140°F+ attics. The adhesive turns to powder, joints separate, and lint blows into your insulation instead of outside. We find this in maybe one of three Longwood homes over 35 years old. Repair means rejoining with metal sleeves and proper clamps, not more tape.
Corrosion from Humidity, Not Just Salt
Longwood’s interior Seminole County position means less direct salt spray than coastal Orlando suburbs, but the sustained 80-90% humidity corrodes metal hoods and damper springs all the same. We stock replacement caps and Guardsman bird guards sized for standard 4-inch terminations, so most repairs finish same visit.
Trusted Brands We Service in Longwood
We carry Aprilaire and Guardsman ventilation accessories, and our Abatement Technologies HEPA filtration captures loosened particles during cleaning so they don’t resettle in your home. For Longwood homeowners who want to maintain clean airflow between service visits, we stock Honeywell and Aprilaire filtration products. Our technicians arrive with Rotobrush rotary brush systems and Nikro negative-pressure extractors - the same equipment we’d use on our own homes - and we keep common replacement caps, bird guards, and rigid aluminum fittings on the truck to avoid return trips.
Common Dryer Vent Cleaning Problems We See in Longwood Homes
- Sagged vinyl flex runs in 140°F+ attics. The 1978-1992 build era used 4-inch vinyl or foil flex with a 15-20 year design life. In Longwood’s unventilated attics, that material sags at bends and collapses entirely at low points, creating lint reservoirs a homeowner can’t see from the laundry room. Camera inspection reveals what blowing air cannot.
- Crushed termination hoods against soffits. Common in Sweetwater Oaks and Sabal Point where builders mounted plastic hoods tight to the soffit line for a cleaner look. The hood can’t open fully, backpressure builds, and lint packs the entire run. We replace these with proper 4-inch metal hoods set to clear the soffit by code-required margins.
- Damp lint mats from previous “cleanings.” Contractors skipping camera inspection sometimes blow compressed air through a run, breaking lint loose but not extracting it. In Longwood’s sustained summer humidity above 80%, that damp mat re-solidifies within weeks. Our Nikro negative-pressure unit pulls debris out, not just around.
- Bird guards installed backward or omitted entirely. We find open terminations in Longwood Hills homes where birds have nested in the duct, sometimes completely blocking airflow. A proper Guardsman bird guard faces outward with mesh sized to stop birds without becoming a lint screen itself.
Pricing for Dryer Vent Cleaning in Longwood, FL
| Service | Typical Range in Longwood |
|---|---|
| Standard dryer vent cleaning (single-family, one story) | $120 - $195 |
| Dryer vent cleaning with camera inspection | $165 - $240 |
| Bird guard or cap replacement | $85 - $150 (parts included) |
| Partial repair / joint resealing in attic | $150 - $275 |
| Full reroute in rigid aluminum | $280 - $450 |
| Complex reroute / soffit relocation | $475 - $650 |
Most Longwood homes fall in the $120-$195 range for straightforward cleaning. What pushes cost higher: multiple story runs, attic access requiring ladder work, previous damage from improper cleaning, or the need for full replacement of degraded flex. We give one flat price per system, agreed in writing before work starts. No per-vent pricing. No door-step revisions. Call (469) 972-3151 for your exact quote - estimates are free.
We Also Serve Cities Near Longwood
Our crews work throughout Seminole County and surrounding communities. If you’re in Longwood or nearby Lake Mary, Altamonte Springs, Casselberry, or Winter Springs, the same Kingswell Guarantee applies: written price, defined arrival window, clean job site, and our 365-Day Done Right Promise in writing.
Serving Longwood, FL - Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Longwood
Yes. We run a camera through the full length of the vent run to show you the condition of the duct material, joint integrity, and any sagging or collapse. If the flex is intact with good slope and secure joints, cleaning suffices. If it’s sagging, delaminated, or collapsed at bends - common in 1980s Longwood homes with attic routing - we’ll show you the footage and recommend replacement with rigid aluminum. Call (469) 972-3151 to schedule an inspection; estimates are free.
Restricted airflow from lint buildup is the cause in about nine of ten Longwood cases we see. The restriction could be a clogged lint screen (check this first), a packed vent run, a crushed exterior hood, or a sag in attic flex that’s created a permanent lint trap. In Sweetwater Oaks specifically, we’ve found original vinyl flex collapsed at 90-degree bends, blocking half the airflow. Camera inspection finds the exact location. Call (469) 972-3151 and we’ll diagnose it.
Longwood’s inland position in Seminole County means less direct salt exposure than coastal communities, but the sustained 80-90% summer humidity corrodes metal hoods and damper springs all the same. We inspect for this during every cleaning. If your termination cap is rusted or the damper sticks open, we stock replacements and can swap them same visit.
Sometimes, but not always honestly. We can access and clean from both ends - dryer disconnect and exterior termination - which handles straightforward lint buildup. But if we suspect sagging, joint separation, or collapse in the attic run (standard in 1978-1992 Longwood homes), camera inspection requires attic access to see the full run and document what needs fixing. We don’t guess. We show you.
If it’s original vinyl or foil flex, yes. That material was designed for 15-20 years and has now spent nearly 40 in attics exceeding 140°F. It has likely become brittle, the inner liner may be shedding particles into your laundry air, and joints have likely separated. Replacement with rigid aluminum before complete failure avoids the moisture damage and mold risk of a blocked vent in Longwood’s humid climate. We give written prices for both cleaning and replacement so you can decide with full information. Call (469) 972-3151.
Ready to get your dryer vent properly inspected and cleaned? Call Kestrel Air Duct Cleaning at (469) 972-3151 for a free, written estimate. We’ll give you the exact price before any work begins, and every job carries our 365-Day Done Right Promise in writing.
Written by Dale Whitmore, Owner at Kestrel Air Duct Cleaning, serving Longwood under the Kingswell Guarantee since 2004.