Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Texas City
Air duct cleaning in Texas City typically runs $350-$650 for a full residential system, with most jobs completed in four to six hours and a written price in your hands before we touch a single vent. We’re the local Air Duct Cleaning team that serves Texas City from our Houston dispatch office, with crews who know the difference between a routine dust job and the industrial-fallout cleaning this refinery-coastal environment actually demands. Call (469) 972-3151 for a free estimate.
Texas City sits in a tough spot for indoor air quality. Marathon and Valero operations line the industrial waterfront, Galveston Bay pushes salt-laden humidity through every neighborhood, and much of the housing stock dates from the post-1947 rebuild era with original sheet metal ductwork that’s seen decades of this unique contamination mix. Our technicians aren’t surprised when they pull dark, oily grit from a return plenum off FM 1764 or find salt-corroded duct connections in a mid-century ranch near Bay Street. We’ve built our Texas City process around these realities.
Why Kestrel Air Duct Cleaning Is Texas City’s Preferred Air Duct Cleaning Company
We’ve earned our reputation in Texas City by treating the local environment as the primary variable, not an afterthought. Our crews don’t arrive with a generic Houston-suburb checklist. They arrive knowing that a home near the ship channel needs source removal for petroleum particulates, not just a vacuum pass for household dust.
Our Texas City customers consistently mention two things in feedback: we show up in the window we gave them, and the price on the invoice matches the price on the estimate. No exceptions. That reliability matters in a market where too many duct cleaners bait with a coupon and switch to a four-figure invoice once the van is parked.
Dispatch and scheduling run from our Houston office, but the crews serving Texas City are local. They know the difference between the 1950s slabs near the old Mainland Center and the newer construction toward Moses Lake. That local knowledge means faster diagnosis and fewer return trips.
Every visit operates under The Kingswell Way: written price before work begins, arrival in the promised window, a clean job site, and our 365-Day Done Right Promise documented in writing. If the work falls short within that year, we return and make it right at no charge.
Commercial Air Duct Cleaning in Texas City
Commercial Air Duct Cleaning in Texas City addresses the same refinery-fallout loading that hits residential systems, but at scale. Office buildings, medical clinics, and light industrial facilities near the port or along Palmer Highway pull in that same mix of petroleum particulates, hydrogen sulfide byproducts, and salt-laden humidity, cycling it through rooftop units and commercial handlers that run continuously through our 9-to-10-month cooling season. A typical commercial system in Texas City runs $800-$2,400 depending on square footage, handler count, and contamination level, with the written price established during our on-site walkthrough before any equipment is mobilized.
Post-Construction and Renovation Cleaning
Texas City’s ongoing industrial and commercial growth means frequent tenant improvements and facility upgrades. We clean ductwork after construction to remove drywall dust, insulation particles, and the welding particulates that settle in commercial trunk lines during facility work. Our Nikro negative-pressure units maintain containment so debris doesn’t redistribute into occupied spaces.
Kitchen Exhaust and Grease Containment Systems
Restaurants and food-service operations near the port or along 25th Avenue face combined loading from cooking effluent and industrial outdoor air. We clean grease-laden exhaust ducts and coordinate with our supply duct cleaning to address both source and return paths, documenting completion for insurance and fire-marshal compliance.
Air Duct Cleaning Services in Texas City
Air Duct Cleaning Services in Texas City from Kestrel cover the full system: supply ducts, return ducts, trunk lines, plenums, and the air handler cabinet itself. We don’t spot-clean visible vents and call it done. Our process starts with a video inspection so you see the condition inside your ductwork, followed by mechanical agitation with Rotobrush rotary brush systems to dislodge debris at the duct wall, negative-air extraction with Nikro equipment to pull contaminants out of the system, and HEPA filtration from Abatement Technologies to keep loosened particles out of your living space during the work. A typical full-system residential cleaning in Texas City runs $350-$650, with mid-century homes at the higher end due to accumulated decades of industrial coastal fallout.
Video Inspection and Documentation
We camera-inspect before and after every job. You’ll see the dark, oily residue or salt crust inside your ducts on a tablet screen, and you’ll see the same trunk line after source removal. This isn’t for show. It verifies that mechanical agitation reached the full duct perimeter, especially critical in panned-joist returns common in Texas City’s 1940s-1960s housing stock where debris packs into corners a vacuum alone won’t touch.
Seal and Repair of Corroded Connections
Salt-air corrosion on exposed sheet metal is routine in Texas City’s older homes. We don’t paint over it. We identify leak paths with smoke pencils, mechanically clean the connection, and seal with proper mastic or metal-backed tape so the return path stays closed. This step alone often drops blower motor amp draw back into manufacturer spec.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Texas City
Our crews arrive with professional-grade equipment, not box-store shop vacs. We clean with Rotobrush rotary brush systems for mechanical agitation, Nikro negative-pressure units for source extraction, and Abatement Technologies HEPA filtration to protect your indoor air during the process. For homeowners who want to maintain clean air between service visits, we stock and install Aprilaire and Guardsman filtration products sized to your handler capacity. Parts and filters for Texas City customers are carried on our service vehicles, so most replacements happen same-visit without a return trip.
Common Air Duct Cleaning Problems We See in Texas City Homes
- Refinery-fallout accumulation in return plenums. Homes within a mile or two of the Marathon and Valero corridor regularly show dark, oily particulate with a faint sulfur odor. Crews trained for inland Houston dust jobs often miss this entirely, leaving the contamination to re-entrain every time the AC cycles.
- Salt-air corrosion on exposed duct connections. Galveston Bay humidity accelerates metal fatigue at sheet metal joints, especially in post-1947 homes with original ductwork. Corroded connections pull unfiltered attic or crawl space air into the return, bypassing your filter entirely.
- Mold colonization from continuous high humidity. Texas City’s AC systems run most of the year, and ductwork that flooded during Hurricane Ike or subsequent storms but was never properly remediated inside the system carries active mold growth that distributes spores at every cycle.
- Wood-ash and unpaved-road dust from outbuilding returns. Rural-edge properties frequently share a return path between the main house and a shop with a woodstove, or pull return air from spaces adjacent to unpaved driveways. This loads the main trunk line with combustion particulates and mineral dust that standard cleaning intervals don’t address.
Pricing for Air Duct Cleaning in Texas City, TX
Most Texas City homes run $350-$650 for a complete residential system cleaning. Smaller post-war ranches with limited duct runs sometimes fall toward $300; larger homes with multiple zones, extensive panned-joist returns, or outbuilding systems connected to the main trunk typically reach $700-$850. Commercial systems start around $800 and scale with square footage and handler count.
What moves the number: the age and condition of your ductwork, whether we find corroded connections that need sealing, the presence of mold requiring antimicrobial treatment, and whether outbuilding or shop systems share your return air. We don’t quote per-vent. We quote one flat price per system, agreed in writing before work starts. No door-step revisions. Call (469) 972-3151 for an exact quote; estimates are free.
We Also Serve Cities Near Texas City
Our crews regularly work Air Duct Cleaning in Texas City and the surrounding communities: La Marque to the north, Hitchcock along the bayfront, Dickinson inland, and Bacliff across the bridge. The same refinery-coastal contamination profile extends through this corridor, and we apply the same process standards at every stop.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Texas City
Every 2-3 years for rural-edge and mid-century homes here, not the 3-5 years typical of inland Houston suburbs. The combination of refinery particulates, Galveston Bay salt humidity, and wood-ash or unpaved-road dust loads ductwork faster than standard guidance assumes. Call (469) 972-3151 to schedule an inspection and we’ll set an interval based on your specific system condition.
That’s refinery-fallout infiltration into your return plenum or duct connections, common in Texas City homes within a few miles of the industrial ship channel. The odor indicates petroleum particulates and hydrogen sulfide byproducts that have accumulated in your ductwork and redistribute when air flows. Source removal with mechanical agitation and negative-air extraction eliminates the residue; masking the odor with filters or deodorizers doesn’t. Call (469) 972-3151 for a video inspection.
Yes. Much of Texas City was rebuilt after the 1947 ammonium nitrate disaster, so a substantial share of homes date from the late 1940s through the 1960s with original or early-replacement sheet metal ductwork and panned-joist returns. These systems require gentler mechanical agitation to avoid damaging aged metal, more thorough camera inspection to identify corrosion points, and careful sealing of leak paths that newer ductwork doesn’t develop. Our Rotobrush systems are adjustable for this purpose.
Yes, and it’s essential. We regularly clean systems on rural-edge Texas City properties where a shop woodstove or outbuilding shares return air with the main house. We isolate and clean each section separately, seal the shop connection if it’s drawing combustion particulates into the main trunk, and document the before-and-after condition with video. The 365-Day Done Right Promise covers our work on these combined systems.
A full residential cleaning takes four to six hours for most Texas City homes. We video-inspect first, then set up negative-air containment at the air handler, agitate supply and return ducts with Rotobrush whip tools, extract debris with Nikro negative-pressure equipment, HEPA-filter the workspace with Abatement Technologies units, and camera-verify the results. Corroded connections are sealed, and we provide before-and-after documentation. Call (469) 972-3151 to book; estimates are free.
Written by Dale Whitmore, Owner at Kestrel Air Duct Cleaning, serving Texas City under the Kingswell Guarantee since 2004.