Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Arlington
Air duct cleaning in Arlington typically runs $350-$650 for a full residential system, with most homes falling in the $450-$550 range depending on duct material age and accessibility. We’re the Arlington crew that shows up in the window we promised, puts the price in writing before touching a single vent, and backs the work with a 365-Day Done Right Promise you can actually point to. Our dispatch team coordinates from the Seattle office, but our trucks and techs serve Arlington neighborhoods directly. Call (469) 972-3151 for a free estimate.
Arlington’s housing story is specific. The bulk of this city’s single-family stock went up between 1970 and 1990, when the population tripled and developers threw up slab-on-grade tract homes fast. Most of those systems still run original fiberglass duct board or first-generation flex duct through unconditioned attics. After 35-50 years of attic temperatures routinely cracking 140°F, that duct board delaminates. It sheds fibers. It crumbles at the seams. What looks like a routine cleaning call often turns into a cleaning-plus-reconstruction job, and homeowners deserve to know that before the van rolls up. We’re direct about it because we’ve done this work here long enough to see the pattern.
Why Kestrel Air Duct Cleaning Is Arlington’s Preferred Air Duct Cleaning Company
We’ve built our reputation in Arlington by treating the city’s specific housing stock as the starting point, not an afterthought. Dale Whitmore and our team have walked enough attics off N Olympic Ave, near Haller Middle School, and through the older neighborhoods east of downtown to know what we’re likely to find before we pop the hatch.
Our technicians are background-checked, uniformed, and equipped with Rotobrush rotary brush systems, Nikro negative-pressure units, and Abatement Technologies HEPA filtration. These aren’t box-store shop vacs. The Rotobrush dislodges debris at the duct wall. The Nikro pulls it out under controlled negative pressure. The Abatement HEPA gear keeps loosened particles out of your living space while we work. We explain each tool before we start because informed homeowners make better decisions.
Every job runs under The Kingswell Way: we say the price, show up in the window we gave, leave the place cleaner, put the guarantee in writing, and come back if it fails. The 365-Day Done Right Promise means if the work falls short within that year, we return and make it right at no charge. No “courtesy visit” discretion. It’s documented on every invoice.
Calls reach a live person, 24/7. Not a voicemail queue. Not an automated system. A real conversation any time of day.
Air Duct Repair in Arlington
Air Duct Repair in Arlington often starts with a cleaning call and ends with rebuilt duct runs. The city’s 1970-1990 build-out left thousands of homes with original fiberglass duct board in attics that hit 140°F+ every summer. That heat cycling degrades the board’s resin binder. It delaminates. It sheds fibers into living spaces. Cleaning alone won’t fix degraded duct board, and we’re upfront about that. A typical air duct repair in Arlington runs $200-$500 for localized sealing and reconnection, with partial duct reconstruction ranging $600-$1,400 depending on linear footage and attic access.
When Duct Board Needs Replacement
We test duct board integrity before we clean. If the material crumbles under light pressure or shows visible delamination at seams, we flag it. Rebuilding with sealed, insulated flex duct or sheet metal eliminates the fiber-shedding problem permanently. The homeowner gets before-and-after photos of every rebuilt section.
Foundation Movement Damage
North Texas’s expansive black clay soil causes Arlington slab foundations to heave and settle seasonally. We’ve found flex duct connections pulled apart at plenums and registers in attic runs, creating gaps that suck in blown fiberglass insulation. Gray fuzz at every supply vent is the tell. Sealing those gaps properly, often with mechanical fasteners and mastic rather than tape, is the real fix.
Ductwork Cleaning in Arlington
Ductwork Cleaning in Arlington means more than vacuuming visible debris. The region’s 7-8 month cooling season pulls airborne dust, cedar pollen, elm pollen, and ragweed through ductwork at rates far higher than temperate climates. Ice storms drive heating demand that stirs settled debris after long dormant periods. A typical residential ductwork cleaning in Arlington runs $350-$550 for a full system with 8-15 vents, with larger homes or heavily contaminated systems reaching $650. Commercial ductwork cleaning starts around $800 and scales with square footage and HVAC zoning.
Negative-Air Extraction Process
We connect a Nikro negative-pressure unit to your trunk line. This creates suction throughout the system while Rotobrush agitation tools loosen debris at the duct wall. The negative pressure pulls dislodged material out before it can resettle. Abatement Technologies HEPA filtration captures particles as small as 0.3 microns, keeping your living space clean during the process.
Air Handler and Coil Cleaning
The air handler and evaporator coil collect what the ducts miss. We HEPA-vacuum the blower compartment, clean accessible coil fins, and document condition with photos. A dirty coil restricts airflow and recirculates contaminants even after duct cleaning. We include this in our full-system scope.
Trusted Brands We Service in Arlington
Our Arlington crews carry Honeywell, Aprilaire, and Guardsman filtration and indoor air quality products for homeowners who want to maintain clean air between service visits. We stock MERV-rated media filters, electronic air cleaners, and UV germicidal lamps compatible with most residential systems common to Arlington’s housing stock. For duct repair and reconstruction, we use Nikro negative-air equipment and Abatement Technologies HEPA containment on every job. Parts availability means faster turnaround. Most filtration upgrades install same-visit once duct cleaning or repair is complete.
Common Air Duct Cleaning Problems We See in Arlington Homes
- Delaminated fiberglass duct board from 140°F attic cycling. The resin binder in original 1970s-1980s duct board breaks down after decades of heat exposure. The material crumbles at seams and sheds fibers into living spaces. Cleaning alone won’t fix it; degraded sections need cutting out and rebuilding with sealed flex or metal.
- Gray fuzz at supply registers from pulled flex duct connections. Black clay soil movement separates flex duct from plenums and registers. The system sucks in blown attic insulation. Homeowners see mysterious gray fuzz. The fix is mechanical reconnection and sealing, not another cleaning pass.
- Rapid re-accumulation from 7-8 month cooling seasons. Arlington’s extended cooling season with heavy pollen load means systems run almost continuously. Without source removal and MERV-rated filtration upgrade, ducts return to pre-cleaning condition within a season.
- Ice storm heating cycles stirring dormant debris. Occasional winter ice storms force heating systems on after long dormancy. Settled dust and debris redistribute through ducts. Homeowners notice musty or burning odors when heat first kicks in.
Pricing for Air Duct Cleaning in Arlington, WA
Most Arlington homes run $450-$550 for a complete residential air duct cleaning. Smaller systems with straightforward access start around $350. Larger homes, complex attic routing, or heavily contaminated systems can reach $650. Commercial duct cleaning starts at $800 and scales with building size and HVAC complexity.
Air duct repair runs $200-$500 for localized sealing and reconnection. Partial duct reconstruction, common with degraded fiberglass duct board, ranges $600-$1,400 depending on linear footage and materials.
What affects cost: duct material type (duct board vs. flex vs. metal), attic accessibility, contamination level, and whether repair or reconstruction is needed. We inspect before quoting. The written price is in your hands before a single vent is touched. One flat price per system. No per-vent pricing. No door-step revisions. Call (469) 972-3151 for a free estimate.
We Also Serve Cities Near Arlington
Our crews work throughout Snohomish County and north King County, including Air Duct Cleaning calls in Marysville, Granite Falls, Lake Stevens, and Stanwood. Same Kingswell Guarantee, same written pricing, same live-answer dispatch. Scheduling coordinates from our Seattle office for efficient routing across the region.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Arlington
Gray fuzz at supply registers almost always means your flex duct connections have pulled apart at the plenum or register boot, and your system is sucking in blown attic insulation. Arlington’s black clay soil causes seasonal foundation movement that separates these connections. The fix is mechanical reconnection and proper sealing, not another cleaning. Call (469) 972-3151 and we’ll inspect the attic routing to confirm.
We test duct board integrity first. If the material is intact and not delaminating, we can clean it with controlled negative-air extraction and soft-bristle agitation. If it crumbles under light pressure or shows visible seam separation, cleaning will accelerate fiber shedding and we recommend partial or full reconstruction with sealed flex duct or metal. We show you the condition with photos before deciding. Call (469) 972-3151 for an inspection.
Arlington’s 7-8 month cooling season with severe cedar, elm, and ragweed pollen loads means residential HVAC systems run almost continuously, drawing far more airborne particulate through ductwork than in temperate climates. Occasional ice storms also drive heating demand that stirs settled debris after dormancy. Ducts here re-accumulate faster, so we emphasize source removal and MERV-rated filtration upgrades rather than cleaning alone. Call (469) 972-3151 to discuss maintenance intervals for your system.
We inspect attic access, test duct board integrity, and photo-document condition before starting. If the original duct board is intact, we connect Nikro negative-air extraction, run Rotobrush agitation through supply and return lines, HEPA-vacuum the air handler, and clean accessible coils. If we find delaminated duct board or pulled flex connections, we stop, show you photos, and quote repair or reconstruction separately before proceeding. The Kingswell Way requires written price before any additional work. Call (469) 972-3151 to schedule.
Cleaning alone is sufficient when ducts are structurally sound and properly sealed. In Arlington’s 1970-1990 housing stock, we often find degraded duct board or separated connections that make cleaning ineffective or counterproductive. We inspect first and report honestly. If repair is needed, we quote it separately with before-and-after photos of the rebuilt sections. The 365-Day Done Right Promise covers both cleaning and repair work. Call (469) 972-3151 for an assessment of your specific system.
Written by Dale Whitmore, Owner at Kestrel Air Duct Cleaning, serving Arlington since 2004 under the Kingswell Guarantee.